What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
10.06.2025 06:03

The MOV will conduct when the voltage exceeds 50% of line voltage.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
The third is lightning and “how it gets conducted into a home.”
In my experience, British people are fat, ugly and arrogant. Why is it and can it be changed?
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Why some allergy experts want this popular group of drugs to go away - Deseret News
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
[old diagram got deleted by accident]
This is where this question deviates from being a 'generic' question, and becomes more specific.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Measles case confirmed in Allegan County, officials provide locations of exposure - WWMT
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
The bolt then partially travels down the line to your home.
He then asserts :
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
One is “what exactly is in a ‘surge protector’ ? ”
He then describes the function of a fuse.
Infrared contact lens enables humans to see in dark - DW
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
but this device (an Inductor) … impedes the rapid changes in the current.
These are simplified answers to the original question, and does not change anything I wrote above.
The Mustang’s New Appearance Pack Is a 1980s Fever Dream - Motor1.com
This device then solves the entire problem.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
One
Why after 50 years of being straight do I constantly desire to suck cock?
so, what happens?
For this case there are devices called Metal oxide varistors (MOV).
In schematic diagrams this is the symbol for a fuse:
There are three different concepts here that are getting confused.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
There are two important concepts here.
How do you leave a relationship when you are still in love?
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
What does a fuse do?
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
This is where the MOV conducts again, and dissipated the energy.
What is lightning?
[image of Common-mode choke]
This is 'the assistant's answer'
nine
An AC voltage/ current source, and an ac inductive load.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Edit 2024–10.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
2024–10–16 [ OO OLAOYE OYEBODE ]
A circuit breaker is similar, but is resettable.
But it can get overloaded, and no longer works.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Now when you have a certain ac resistance, then a current flows in a loop.
Upvotes:
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
2024–10–14 [Omar Gharbi Omar Gharbi ]
Because the load is inductive, the current lags the voltage.(by a bit).
but I think this circuit , shows a few more pieces.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
But… the neutral is now “floating” because of the 1 ohm resistance.
The other is “what does a “fuse” do?”
These devices are installed between the “hot” and “neutral” and protective ground.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Here is a simplified AC power diagram.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
He then describes Rainy Season and Lightning.
So, the voltage could go up to 500 volts, and the fuse will not open up.
At least they know the answer if they wanted it.
I post the exact comment here.
a photo is worth a thousand words.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
It also is a device that limits the change in current flow.
At one ohm, the resistor has a maximum of 1 watt power.
It seems Mohan does not understand the difference between a comment and an Answer.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
(Dc diagram shown, AC is similar).
Barnstars:
what exactly is a ‘surge’ protector?
A fuse is a non-resetable over current circuit protector.
the problem then depends on "how fast does the fuse operate?".
First Sentence:
eight
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
2024–10–10[John johnson John Johnson ]
This one hit behind the barn.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.